Changing default etherchannel loadbalancing algorythm

[rjuchta]

Hello,

Will there be some pause in traffic on formed etherchannel interfaces (4500E switch), when i will change the default etherchannel loadbalancing method to src-dst-port (or any other non-default method)?

thanks,

WM

[jonrojas]

Hi,

The following link has the commands to do the same:

http://www.cisco.com/en/US/tech/tk389/tk213/technologies_tech_note09186a0080094714.shtml#cat4k

port-channel load-balance {src-mac | dst-mac | src-dst-mac | src-ip | dst-ip | src-dst-ip | src-port | dst-port | src-dst-port}

HTH