I want to change the HSRP groups on my gateway interfaces to have a separate group per VLAN but I will have to keep traffic going whilst I do it. I figure I will have to add the old virtual interface MAC address to the interfaces as a static address, but it occurred to me that many people here prolly have a tried and tested procedure for this.
Re: Changing HSRP group whilst maintaining service
Isn't there a time period when the users aren't using the system or atleast when there are reduced users on the subnet? That would usually be the best time to push through your changes and still allow you to verify everything is working as it should.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...