02-13-2008 12:06 AM - edited 03-05-2019 09:07 PM
Team,
I have configured port-channel88 on catalyst 6509-E switch but when i tried to configure the this channel on tengigabit interface getting the following error message.
***************************************ERROR MESSAGE*******************************
(config-if)#Channel-group 88 mode on
Command rejected (Port-channel88, Te1/1): Either port is L2 and port-channel is
L3, or vice-versa
**************************************************************************************
*************************Ten gigabit interface 1/1*************************
interface tengigabitethernet1/1
no ip address
channel-group 88 mode on
****************************************************************************
*****************************port channel************************
interface port-channel88
no ip address
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
switchport nonegotiate
storm-control broadcast level 20.00
*****************************************************************
Any help will be highly appreciated.
Regards,
Khan
02-13-2008 12:18 AM
Hi Khan,
On Te1/1 interface make it switchport and trunk with encapsulation. W/o switchport command the interface is a L-3 interface.
interface tengigabitethernet1/1
no ip address
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 88 mode on
Pls. rate if it helps..
Regards,
*aijaz*
02-13-2008 01:09 AM
Aijaz,
Thanks for your reply. Is there any documentation for this on cisco site for more details because i need to see cisco documentation before i modify the configuration.
Sure i will rate your comment.
Regards,
02-13-2008 01:15 AM
Please go thru the link....
Its looks like you want to create layer-2 ether channel as per the configuration, for this to work the interfaces should be made as layer-2
Regards,
*aijaz*
02-19-2008 02:46 AM
Hi,
Pls. let me know whether my solution worked or not...
If worked..pls rate it..
Thanks..
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: