Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

cisco 1711 not detecting any wic's

I have installed working wic1-enet and wic1-dsu-t1 cards but they do not show up when i run

sh ip int br

or

sh int

neither on bootup :

Cisco IPM (MPC862P) processor (revision 0x101) with 91879K/6425K bytes of memory.

Processor board ID FOC09140S4A (3865132210), with hardware revision 0000

MPC862P processor: part number 7, mask 0

1 FastEthernet interface

32K bytes of NVRAM.

32768K bytes of processor board System flash (Read/Write)

the wic0 and wic1 lights on the router are green when i have inserted the cards, they just dont show up in the console.

router has 96 ram / 32 flash, and 1 built in Fa0 interface.

c1700-advipservicesk9-mz.124-25d.bin

4 REPLIES
VIP Purple

cisco 1711 not detecting any wic's

HI Annand,

Can u plz tell us the exact name of wic card???

Regards

New Member

cisco 1711 not detecting any wic's

I already did.

VIP Purple

cisco 1711 not detecting any wic's

HI Anand,

AS per this docs:

https://supportforums.cisco.com/docs/DOC-1927

http://www.cisco.com/web/ANZ/cpp/refguide/hview/router/1700.html

To work, the WIC-1ENET card must be installed in slot0

WIC1-ENET supported on 1700series router with these IOS:Cisco IOS versions 12.1(3)XT, 12.1(5)YB, 12.2(2)XJ, 12.2(4)T

Regards

Hope it helps.

New Member

cisco 1711 not detecting any wic's

apparently the 1711 is a fixed configuration router and will only work with the wic4-esw card and an isdn card.

i used wic1-enet cards in both slots on 1720 and 1721 routers.

131
Views
0
Helpful
4
Replies