Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco 1801 Router with Guess access

             We currently have a Cisco 1801 fixed router on a fixed ip address setup and all works well, what we are looking to do is allow guest to log in using a DHCP type "easy" setup.

any suggestions?

our AP is a Cisco   AP541N

Everyone's tags (4)
1 REPLY

Re: Cisco 1801 Router with Guess access

Hi Andrew,

Going to do a few things here:

1- Create the vlan, dhcp pool, static routes (if you desire), and access control lists (if you want to prevent certain traffic between existing network and new guest access) on the 1801 router.

interface fastethernet 0/0 no ip address

interface fastethernet 0/0.1 encapsulation dot1q 1 native      (native vlan 1)

        ip address 192.168.1.1 255.255.255.0

interface fastethernet 0/0.2 encapsulation dot1q 2  (guest vlan 2)

      ip address 192.168.2.1 255.255.255.0

ip dhcp pool Pool1                                                 

   network 192.168.1.0 255.255.255.0

   domain-name DOMAIN.COM                                                                                   

   dns-server 4.2.2.2                                                

   default-router 192.168.1.1 

ip dhcp pool Pool2                                                 

   network 192.168.2.0 255.255.255.0

   domain-name DOMAIN.COM                                                                                   

   dns-server 4.2.2.2                                               

   default-router 192.168.2.1 

Remember, you'll need the nat, speed & duplex commands, as you likely already have configured in your 1801, static routes if you want intervlan routing, and access control lists if you so desire.

2 - I'm assuming there is a switch between the 1801 and the AP. You'll need to trunk the vlans from 1801 to switch and trunk vlans from switch to AP541n

3 - create a new guest access ssid, matching the new vlan you created on the 1801 on the AP541n. Set up wireless security as you desire.

Best,

David

Please remember to rate helpful resonses and identify correct answers.

483
Views
0
Helpful
1
Replies
CreatePlease login to create content