Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco 1811

I have enherited a netwrok utilizing a Cisco 2960G switch, Cisco 1811 router with a Pix-506e.  Currently there are two vlans configued on the router and the 2960 switch.  Vlan1 10.255.1.0/27 and Vlan 2 192.168.1.0/24.  The folks that own the network need one IP of 192.168.1.57 to be able to get out to an IP address of 199.48.213.150.  From the firewall I am able to ping this IP,199.48.213.150, but not from the router or switch.                 

1 REPLY

Re: Cisco 1811

I strongly recommend you remove your attachments as soon as possible. And upload relevant sanitized configurations only. Uploading your entire firewall configuration. Is not a good idea, at all!

==========================
http://www.rConfig.com 

A free, open source network device configuration management tool, customizable to your needs!

- Always vote on an answer if you found it helpful

========================== http://www.rconfig.com A free, open source network device configuration management tool, customizable to your needs! - Always vote on an answer if you found it helpful
91
Views
0
Helpful
1
Replies