cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
6360
Views
5
Helpful
2
Replies

CISCO 1812 Router VLAN Configuration

md.sakibnaz
Level 1
Level 1

Hello.
I have a CISCO 1812 Series Router with FE0-9 interfaces.
I want to configure a VLAN ID 100 with access port FE2-6 and assign an IP address to the VLAN interface.
Can anybody provide me an example regarding configure VLAN on CISCO 1812 Router?
Thanks in advance.

Regards.
Sakibnaz.

1 Accepted Solution

Accepted Solutions

Jon Marshall
Hall of Fame
Hall of Fame

md.sakibnaz wrote:

Hello.
I have a CISCO 1812 Series Router with FE0-9 interfaces.
I want to configure a VLAN ID 100 with access port FE2-6 and assign an IP address to the VLAN interface.
Can anybody provide me an example regarding configure VLAN on CISCO 1812 Router?
Thanks in advance.

Regards.
Sakibnaz.

router(config)# vlan 100

router(config-vlan)# name v100

note if the above doesn't work then -

router# vlan database

router(vlan)# vlan 2 name v100

router(config)# int vlan 100

router(config-if)# ip address x.x.x.x

router(config)# no shut

router(config)# int fa2

router(config-if)# switchport access vlan 100

router(config-if)# spanning-tree portfast

etc.. for each physical interface you want in vlan 100.

Jon

View solution in original post

2 Replies 2

Jon Marshall
Hall of Fame
Hall of Fame

md.sakibnaz wrote:

Hello.
I have a CISCO 1812 Series Router with FE0-9 interfaces.
I want to configure a VLAN ID 100 with access port FE2-6 and assign an IP address to the VLAN interface.
Can anybody provide me an example regarding configure VLAN on CISCO 1812 Router?
Thanks in advance.

Regards.
Sakibnaz.

router(config)# vlan 100

router(config-vlan)# name v100

note if the above doesn't work then -

router# vlan database

router(vlan)# vlan 2 name v100

router(config)# int vlan 100

router(config-if)# ip address x.x.x.x

router(config)# no shut

router(config)# int fa2

router(config-if)# switchport access vlan 100

router(config-if)# spanning-tree portfast

etc.. for each physical interface you want in vlan 100.

Jon

Thanks Jon.

Just I got the 1812 in hand & test ur command.

Regards.

Sakibnaz.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco