Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

cisco 1841 with dual connexion adsl

i have cisco 1841 ( 4 FE 1 ATM )

i use dial0 for connexion in the office

now i buy hwic adsl and isp account i want to have to connexion dialer one for http et the second for smtp (i have exchange serveur in office)

how can i configure the second dialer and definie the protocol http and smtp destination.

is the load balancing the solution????

1 REPLY
Silver

Re: cisco 1841 with dual connexion adsl

ADSL high-speed digital data transmissions between the customer premises equipment (CPE) and the central office (CO).

To configure the ADSL port on an ADSL HWIC, complete the following steps:

SUMMARY STEPS

1. enable

2. configure terminal

3. interface atm interface-id

4. ip address IP-address

5. pvc [name] vpi/vci

6. protocol ip IP-address

7. vbr-rt peak-rate average-rate burst

8. encapsulation {aal5autoppp | aal5ciscoppp | aal5mux | aal5nlpid | aal5snap}

9. exit

10. dsl operating-mode {ansi-dmt | auto | itu-dmt | adsl2 | adsl2+}

or

dsl operating-mode {etsi | auto | itu-dmt | adsl2 | adsl2+}

11. no shutdown

12. exit

13. exit

For further information click this link.

http://www.cisco.com/en/US/docs/ios/12_4t/12_4t11/dsl_hwic.html#wp1051249

293
Views
0
Helpful
1
Replies
CreatePlease to create content