The sluice between LAN is necessary to us. From requirements, - a filtration of packages by the set rules (to the ip-address, under the report); NAT.
From LAN behind a sluice (internal) users will work with servers in the second (external) local network, through the equipment located in the second (external) network to be connected to the Internet. Users of an external network will work with video servers of an internal network (the traffic nearby 25Mbps on the client, clients nearby 10). All connections through NAT. We have chosen a sluice cisco 1941/K9, whether the given device will approach us?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...