Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco 2611 XM

I use Cisco 2611 XM for my existing setup of IPLC-VOIP technology with a 4 voice extensions, I plan to increase the number extensions to 8, Is my existing model is compatible for this increase ?

3 REPLIES
Cisco Employee

Re: Cisco 2611 XM

Hi,

What do you mean by 4 voice extensions, is that the FXS port count or the PRI lines count.

2611XM has 2 WIC slots which can take upto 4 Pri lines depending on the WIC card used. You can increase it max to 6 lines by using an avaialble NM slot. You can add a wide variety of Voice WICS to it. Please the modules supported in the NM slots.

http://www.cisco.com/en/US/products/hw/routers/ps259/products_data_sheet0900aecd800fa5be.html

HTH,

-amit singh

New Member

Re: Cisco 2611 XM

Hi,

I try to mean 4 analog phone lines connected to the router used for VOIP thru IPLC technology.

Can this be increased to 8 analog phone lines with the same router model ?

Re: Cisco 2611 XM

I think you are using 2 x VIC2-2FXS card for spporting 4 analog phones.

In case you want to increase it to 8, you would require 2 x VIC-4FXS/DID

http://www.cisco.com/en/US/products/hw/routers/ps259/products_data_sheet0900aecd800fa5be.html

http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a0080094fac.shtml

HTH

Narayan

171
Views
0
Helpful
3
Replies
CreatePlease login to create content