Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Cisco 2651 Router. Error on bootup.

After the System bootstap version information I get a error that the router halts on.

SPD info: Invalid memory type for DIMM 00000000.

The router halts there. Does this mean the DRAM is bad or the wrong type for the router?

thanks,

Jer

4 REPLIES
Silver

Re: Cisco 2651 Router. Error on bootup.

This could mean:

- The DIMM is not seated correctly in the slot. Check RAM, remove and reseat correctly.

- Wrong type for the router.

- Faulty RAM.

You need to replace the RAM in the last two cases.

Community Member

Re: Cisco 2651 Router. Error on bootup.

I removed the ram and reinstalled it a few times with no improvement.

Im guessing the ram is either faulty or the wrong type .

Thanks for the response.

Silver

Re: Cisco 2651 Router. Error on bootup.

Community Member

Re: Cisco 2651 Router. Error on bootup.

Can you mix memory chips in a 2600? I needed a little more for my IOS so I pulled an 8 MB chip from one router and added to a 32 MB chip and it won't take it.(Invalid memory type for Dimm 00000000) If I order some new extra memory, does it have to match the one that's already in there? Please advise...

Thanks,

Chris

468
Views
0
Helpful
4
Replies
CreatePlease to create content