Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cisco 2800 route filtering

Hello,

I have a router with two interfaces what i need to filter the HTTP traffic from one interface and the rest of the traffic through the other on my cisco router 2800. Can anyone help me with this?

3 REPLIES
Bronze

Re: Cisco 2800 route filtering

If you are trying to block HTTP traffic from passing THROUGH this router, try this

:

ip access-list extended NO-HTTP

deny tcp any any eq 80 log

perimt ip any any log

:

interface f0/0

ip access-group NO-HTTP in

:

If you are trying to block HTTP and HTTPS TO this router, try this

:

no ip http server

no ip http secure-server

HTH

Frank

New Member

Cisco 2800 route filtering

Hello all,

well actually i am not trying to block the HTTP traffic i am trying to force it to passe through one interface and the rest of the traffic through another with a fall back in case one of my connexion goes down

let say that i have s0/0/0 and s0/1/0

put http through s0/0/0 and the rest of the traffic through s0/1/0

thank you

Bronze

Cisco 2800 route filtering

Hey Mohamed,

You have several options, the easiest would be policy based routing (PBR), and/or floating static routes.

Let us know how it works!!!

Tks

Frank

PBR Link

http://www.cisco.com/en/US/docs/ios/12_2/qos/configuration/guide/qcfpbr_ps1835_TSD_Products_Configuration_Guide_Chapter.html

Floating Static routes

http://www.cisco.com/en/US/docs/switches/datacenter/sw/5_x/nx-os/unicast/configuration/guide/l3_route.html#wp1074034

285
Views
0
Helpful
3
Replies