11-28-2013 10:44 AM - edited 03-07-2019 04:50 PM
Hi,
please tell me (or give me a tutorial about) how to add a sub-interface, create a RIP router process and configure route redistribution with OSPF, on Cisco 2900.
Thanks,
Adrian.
Solved! Go to Solution.
11-28-2013 10:54 AM
Here is an example of configuring Sub-interface on the router
interface FastEthernet0/0.20
encapsulation dot1Q 20
ip address 10.20.10.1 255.255.255.0
RIP
http://www.cisco.com/en/US/docs/ios/12_2/ip/configuration/guide/1cfrip.html
router rip
network x.x.x.x.
Route Redistribution
http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a008009487e.shtml
HTH
11-28-2013 10:54 AM
Here is an example of configuring Sub-interface on the router
interface FastEthernet0/0.20
encapsulation dot1Q 20
ip address 10.20.10.1 255.255.255.0
RIP
http://www.cisco.com/en/US/docs/ios/12_2/ip/configuration/guide/1cfrip.html
router rip
network x.x.x.x.
Route Redistribution
http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a008009487e.shtml
HTH
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide