Ok so weirdest thing. It wouldn't work from the LAN, but I was able to load it over the WAN. Took forever but once it was on the router I set the router to boot from the new image, router came back online with the new image successfully.
I tried to download an image of router 1841 on router 2851 and getting same error. Please check if you are downloading a valid file. If that does not help, please upload show tech of the router.
R11_2851#copy tftp flash: Address or name of remote host [10.76.76.160]? Source filename [c1841-advsecurityk9-mz.124-24.T5]? c1841-advsecurityk9-mz.124-24.T5.bin Destination filename [c1841-advsecurityk9-mz.124-24.T5.bin]? Accessing tftp://10.76.76.160/c1841-advsecurityk9-mz.124-24.T5.bin... %Warning: File not a valid executable for this system Abort Copy? [confirm] R11_2851#
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...