Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

cisco 2950: vlan 1 is up but line protocol down.......!

Hi all,

My 2950 switch's vlan 1 is showing status as up but line protocol down. I was connected to consol at that time. Any thoughts... why so?

--gaurav

1 ACCEPTED SOLUTION

Accepted Solutions
Purple

Re: cisco 2950: vlan 1 is up but line protocol down.......!

You need at least 1 active "connected" switchport in order for the management interface to come active . if you plug into one of the switchports the interface go up/up .

2 REPLIES
Purple

Re: cisco 2950: vlan 1 is up but line protocol down.......!

You need at least 1 active "connected" switchport in order for the management interface to come active . if you plug into one of the switchports the interface go up/up .

New Member

Re: cisco 2950: vlan 1 is up but line protocol down.......!

Thanks a lot Glen..

I just realised that one can always learn something or other from a good company.

--gaurav

680
Views
0
Helpful
2
Replies