Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco 2955 - Send config changes to syslog server?

Hello,

I can't seem to send config changes to our syslog server on a 2950, I'm fine with 2960's and 3750's.  The Cisco 2955 is using the latest IOS

c2955-i6k2l2q4-mz.121-22.EA14.bin.

Here is what I have added:

logging buffered 64000 debugging

logging console informational

logging monitor informational

logging facility local4

logging source-interface Vlan10

logging 172.21.1.3

logging synchronous

logging synchronous

          

The only sylog message I get is "Configured from console by username on vty0 (10.1.1.35)

Any ideas

5 REPLIES

Cisco 2955 - Send config changes to syslog server?

Andy,

I'm not sure if this will fix your issue, but try "logging userinfo"

HTH,

John

HTH, John *** Please rate all useful posts ***
New Member

Cisco 2955 - Send config changes to syslog server?

This is all I get:

#logging ?

  Hostname or A.B.C.D  IP address of the logging host

  buffered             Set buffered logging parameters

  cns-events           Set CNS Event logging level

  console              Set console logging level

  exception            Limit size of exception flush output

  facility             Facility parameter for syslog messages

  file                 Set logging file parameters

  history              Configure syslog history table

  monitor              Set terminal line (monitor) logging level

  on                   Enable logging to all supported destinations

  rate-limit           Set messages per second limit

  source-interface     Specify interface for source address in logging

                       transactions

  trap                 Set syslog server logging level

Re: Cisco 2955 - Send config changes to syslog server?

You need to set the trap level. Set logging trap notify.

Sent from Cisco Technical Support iPad App

Re: Cisco 2955 - Send config changes to syslog server?

Hi Andy,

This feature can be configured under the archive configuration mode with the log config command and notify syslog to enablethe sending of notifications of configuration changes to your remote syslog.

The configuration could be the next

archive

log config

  logging enable 50

  notify syslog

  hidekeys

HTH,

Vasilis

New Member

Re: Cisco 2955 - Send config changes to syslog server?

The 2955 doesn't seem to have an archive option:

#?

Configure commands:

  aaa                         Authentication, Authorization and Accounting.

  access-list                 Add an access list entry

  alarm                       Configure alarm profile

  alias                       Create command alias

  arp                         Set a static ARP entry

  banner                      Define a login banner

  boot                        Boot Commands

  buffers                     Adjust system buffer pool parameters

2027
Views
0
Helpful
5
Replies
CreatePlease to create content