Cisco 2960 as DHCP Server

[borisloong]

Dears,

Two Cisco 3650 switch and six 2960 switch (whether is as DHCP server assign ip addresses to different VLAN (totally 250 PCs)

I have a few question,

1. all switch connected by trunk link

2. all 2960 switch as DHCP server assign ip address to different Vlan hosts (PC)

as this environment whether is acceptable, please advise me the instruction, thx.

[royalblues]

I suggest you configure the 3560 as the DHCP server and uplink all the 2960 switches to it.

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3560/12225see/scg/swdhcp82.htm

HTH

Narayan