Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Cisco 2960 Switch !!! WARNING: The switch is not usable !!!

POST: PortASIC RingLoopback Test: Begin

TCAM (asic:3, bit:5) address bus test failed

From what is it getting in mistake?

what deffect is it in it?

_____________________________

Regards

Bayasgalan.B

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Cisco 2960 Switch !!! WARNING: The switch is not usable !!!

Hardware Failure !!

Please raise an RMA !!

Cheers,

4 REPLIES
Hall of Fame Super Gold

Re: Cisco 2960 Switch !!! WARNING: The switch is not usable !!!

You need to get a TAC raised.  The switch has just suffered a catastrophic failure.

Re: Cisco 2960 Switch !!! WARNING: The switch is not usable !!!

POST: PortASIC RingLoopback Test: Begin

TCAM (asic:3, bit:5) address bus test failed

From what is it getting in mistake?

what deffect is it in it?

_____________________________

Regards

Bayasgalan.B

Hi Bayasgalan,

This is an hardware failure of TCAM address bus you need to replace the  switch,any other logs at the booting time in order to have clear idea.

Hope to Help !!

Ganesh.H

Remember to rate the helpful post

Cisco Employee

Re: Cisco 2960 Switch !!! WARNING: The switch is not usable !!!

Hardware Failure !!

Please raise an RMA !!

Cheers,

Community Member

Re: Cisco 2960 Switch !!! WARNING: The switch is not usable !!!

Please help me!!!

what's the reason of this kind of defect?

Regards

B.Bayasgalan

3162
Views
0
Helpful
4
Replies
CreatePlease to create content