Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco 2960s Boot Commands

On a new Cisco 2960S when I did try and execute the dir flash: I only got a list of the catagorys and not a list of the files.

New Member

Cisco 2960s Boot Commands

Here is the show ver

PC-2960S#sh ver
Cisco IOS Software, C2960S Software (C2960S-UNIVERSALK9-M), Version 15.0(1)SE2, RELEASE SOFTWARE (fc3)
Technical Support:
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Thu 22-Dec-11 00:53 by prod_rel_team

ROM: Bootstrap program is Alpha board boot loader
BOOTLDR: C2960S Boot Loader (C2960S-HBOOT-M) Version 12.2(55r)SE, RELEASE SOFTWARE (fc1)

PC-2960S uptime is 2 hours, 36 minutes
System returned to ROM by power-on
System image file is "flash:/c2960s-universalk9-mz.150-1.SE2.bin"

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

If you require further assistance please contact us by sending email to

cisco WS-C2960S-48LPS-L (PowerPC) processor (revision D0) with 131072K bytes of memory.
Processor board ID FOC1545Y340
Last reset from power-on
1 Virtual Ethernet interface
1 FastEthernet interface
52 Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.

512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address       : 08:D0:9F:74:08:00
Motherboard assembly number     : 73-11907-06
Power supply part number        : 341-0393-02
Motherboard serial number       : FOC154308YY
Power supply serial number      : LIT15360AL0
Model revision number           : D0
Motherboard revision number     : A0
Model number                    : WS-C2960S-48LPS-L
Daughterboard assembly number   : 73-11933-04
Daughterboard serial number     : FOC15440126
System serial number            : FOC1545Y340
Top Assembly Part Number        : 800-30937-02
Top Assembly Revision Number    : C0
Version ID                      : V02
CLEI Code Number                : COMGZ00ARB
Daughterboard revision number   : A0
Hardware Board Revision Number  : 0x01

Switch Ports Model              SW Version            SW Image
------ ----- -----              ----------            ----------
*    1 52    WS-C2960S-48LPS-L  15.0(1)SE2            C2960S-UNIVERSALK9-M

Configuration register is 0xF

Hall of Fame Super Gold

Cisco 2960s Boot Commands

On a new Cisco 2960S when I did try and execute the dir flash: I only got a list of the catagorys and not a list of the files.

The command is "dir" only.

CreatePlease login to create content