Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Cisco 2960S Configured in Transparent mode

I have a Cisco 2960S gig switch configured in transparent mode with multiple vlans configured. I have printers that I can ping, the ports shows up but on the printer it says offline. Any idea what could be causing this?

Everyone's tags (3)
2 REPLIES
VIP Super Bronze

Being offline is probabaly a

Being offline is probabaly a function of the printer.  As long as you can ping the printer's IP, the connectivity is good. Check the printer.

 

HTH

Hall of Fame Super Blue

If your printer and your PCs

If your printer and your PCs are all in the same subnet and only the printer is not working then VTP mode Transparent has nothing to do with your issue. 

 

I'd be keen to know if you have a firewall blocking anything from the IP address of the printer?  Maybe the IP subnet mask or default gateway of the printer is not working?  

 

What do you get when you do a "sh mac-address interface <PRINTER port>"?

55
Views
0
Helpful
2
Replies
CreatePlease to create content