Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco 3020 error - WHat is err-disabled reson lsgroup

cisco 3020 report below error message:

*Mar 1 00:07:10: %PM-4-ERR_DISABLE: lsgroup error detected on Gi0/1, putting Gi0/1 in err-disable state

*Mar 1 00:07:10: %PM-4-ERR_DISABLE: lsgroup error detected on Gi0/2, putting Gi0/2 in err-disable state

*Mar 1 00:07:10: %PM-4-ERR_DISABLE: lsgroup error detected on Gi0/3, putting Gi0/3 in err-disable state

------------------ show interfaces status err-disabled ------------------

Port Name Status Reason Err-disabled Vlans

Gi0/1 err-disabled lsgroup

Gi0/2 err-disabled lsgroup

Gi0/3 err-disabled lsgroup

Gi0/4 err-disabled lsgroup

Gi0/5 err-disabled lsgroup

Gi0/6 err-disabled lsgroup

Gi0/7 err-disabled lsgroup

Gi0/8 err-disabled lsgroup

Gi0/9 err-disabled lsgroup

Gi0/10 err-disabled lsgroup

Gi0/11 err-disabled lsgroup

Gi0/12 err-disabled lsgroup

Gi0/13 err-disabled lsgroup

Changing 3020 did not resolve problem

1 REPLY
Silver

Re: Cisco 3020 error - WHat is err-disabled reson lsgroup

The port manager detected a misconfiguration or misbehavior and placed the interface in an error-disabled state. A recovery is attempted after the configured retry time (the default is 5 minutes). [chars] is the port where the threshold was exceeded.

http://www.cisco.com/en/US/docs/switches/blades/3040/software/release/12.2_44_se/system/message/msg_desc.html

3677
Views
0
Helpful
1
Replies
CreatePlease login to create content