I'm trying to connect port 23 and 24 as interconnect port in C-Class bay1 and bay2. From the documention it says I ned to use interface command media-type internal but in my case I'm not able top bring interface 23 and 24 up. Have anyone seen this before and what is the fix? I may be missing something. Thanks.
I had a similar problem but it resolved once I had some sort of IP connectivity to both switches. It didn't matter if it was Fa0 or one of the Gigabit ports, but once I had connectivity I saw ports 23 and 24 on both switches go up/up.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...