Cisco 3064 switch upgrade from 6.0.x to 7.0.x issue
I am trying to upgrade from 6.0.2.U6.5c to nxos.7.0.3.I4.7, before upgrade i want to make sure it pass all checks but i got this error. This switch isn't in production yet but want to make sure it goes well and smooth. Am i doing something wrong?
BIOS: version 2.6.0
loader: version N/A
kickstart: version 6.0(2)U6(5c)
system: version 6.0(2)U6(5c)
Power Sequencer Firmware:
Module 1: version v1.0
SFP uC: version 2.12
BIOS compile time: 08/06/2014
kickstart image file is: bootflash:///n3000-uk9-kickstart.6.0.2.U6.5c.bin
kickstart compile time: 4/6/2016 22:00:00 [04/07/2016 05:46:42]
system image file is: bootflash:///n3000-uk220.127.116.11.U6.5c.bin
system compile time: 4/6/2016 22:00:00 [04/07/2016 06:14:31]
Searches on Cisco support forum site suggests this error is related to bootflash space/ established SFTP connections/ var/tmp directory. And the workaround (reload/clearing bootflash) from Cisco support forum didn’t work.
In this case, I execute install instead of verification as suggested on one of the forum and it works.
switch# install all nxos bootflash:nxos.7.0.3.I7.1.bin
Installer is forced disruptive
Verifying image bootflash:/nxos.7.0.3.I7.1.bin for boot variable "nxos".
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...