Cisco 3064 switch upgrade from 6.0.x to 7.0.x issue
I am trying to upgrade from 6.0.2.U6.5c to nxos.7.0.3.I4.7, before upgrade i want to make sure it pass all checks but i got this error. This switch isn't in production yet but want to make sure it goes well and smooth. Am i doing something wrong?
BIOS: version 2.6.0
loader: version N/A
kickstart: version 6.0(2)U6(5c)
system: version 6.0(2)U6(5c)
Power Sequencer Firmware:
Module 1: version v1.0
SFP uC: version 2.12
BIOS compile time: 08/06/2014
kickstart image file is: bootflash:///n3000-uk9-kickstart.6.0.2.U6.5c.bin
kickstart compile time: 4/6/2016 22:00:00 [04/07/2016 05:46:42]
system image file is: bootflash:///n3000-uk188.8.131.52.U6.5c.bin
system compile time: 4/6/2016 22:00:00 [04/07/2016 06:14:31]
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...