Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco 3550 (24) getting error message when booting...

Dear Experts,

We have Cisco 3550 (24)  in this swich when boot getting error message continue :

nitializing flashfs...
flashfs[1]: 91 files, 5 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 15998976
flashfs[1]: Bytes used: 7989760
flashfs[1]: Bytes available: 8009216
flashfs[1]: flashfs fsck took 10 seconds.
flashfs[1]: Initialization complete.
...done Initializing flashfs.
POST: CPU Buffer Tests : Begin
POST: CPU Buffer Tests : End, Status Passed
POST: CPU Interface Tests : Begin
Timeout while verifying the CPU Interface channel 0 on switch core 0
POST: CPU Interface Tests : End, Status Failed
SYSTEM INIT: INSUFFICIENT MEMORY(972 BYTES) TO BOOT THE IMAGE!

Local Memory     Free = 400 Total = 51833492 Used = 51833092
IO Memory           Free = 8148296 Total = 8388608 Used = 240312
315A18


Unexpected exception to CPU vector 700, PC = 0
-Traceback= 0 315974 1E8484 1EBAB0


=== Flushing messages (00:00:14 UTC Mon Mar 1 1993) ===

Buffered messages:
Queued messages:
00:00:14: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console debugging out
put.

00:00:13: %SYS-2-MALLOCFAIL: Memory allocation of 972 bytes failed from 0x315A18
, alignment 0
Pool: Processor  Free: 400  Cause: Not enough free memory
Alternate Pool: None  Free: 0  Cause: No Alternate pool

-Process= "Init", ipl= 0, pid= 3
-Traceback= 1C57FC 1C7804 315A1C 2D6890 1E29C4 1E2A74 1197D4 1199DC 1E8484 1EBAB
0
00:00:13: %SYS-5-RELOAD: Reload requested
Cisco Internetwork Operating System Software
IOS (tm) C3550 Software (C3550-I5K2L2Q3-M), Version 12.1(22)EA6, RELEASE SOFTWAR
E (fc1)
Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Fri 21-Oct-05 02:30 by yenanh

Program Exception (0x0700)!
CPU Register Context:
Vector = 0x00000700  PC = 0x00000000  MSR = 0x0008B030  CR = 0x48000000
LR = 0x00312D84  CTR = 0x00312854  XER = 0x20000000
R0 = 0x00000000  R1 = 0x00CA0830  R2 = 0x00000000  R3 = 0x00000000
R4 = 0x00000000  R5 = 0x00000000  R6 = 0xBEEFCAFE  R7 = 0x00000000
R8 = 0x00000000  R9 = 0x03FFD62C  R10 = 0x00000000  R11 = 0x03FFD62C
R12 = 0x00000004  R13 = 0x7765A653  R14 = 0x003158D0  R15 = 0x00000000
R16 = 0x00000000  R17 = 0x00000000  R18 = 0x00000000  R19 = 0x00000000
R20 = 0x00000000  R21 = 0x00000000  R22 = 0x00000000  R23 = 0x00000000
R24 = 0x00000000  R25 = 0x00000000  R26 = 0x00CFF79C  R27 = 0x00CD0000
R28 = 0x00000000  R29 = 0x00000000  R30 = 0x00000000  R31 = 0x00000000

Stack trace:
PC = 0x00000000, SP = 0x00CA0830
Frame 00: SP = 0x00CA0850    PC = 0x00312D64
Frame 01: SP = 0x00CA0868    PC = 0x00315974
Frame 02: SP = 0x00CA0870    PC = 0x001E8484
Frame 03: SP = 0x00000000    PC = 0x001EBAB0

Please guide me how can i solve this and what is the issue in this switch.

Thanks in ADV,

Vaib...

1 REPLY
Bronze

Re: Cisco 3550 (24) getting error message when booting...

This indicates a hardware problem with the switch. You should get it replaced

668
Views
0
Helpful
1
Replies
CreatePlease to create content