Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

Cisco 3560 & ADSL Line can work?

HI, I would like to get expert consult whether ADSL line (do not have fix IP)can work together 3560 (as L3 routing) to establish an office LAN with few difference Vlan?

Currently my physical connection is

Phone line->ADSL modem->ADSL Router-> Cisco 3560-> PC

Hall of Fame Super Bronze

Re: Cisco 3560 & ADSL Line can work?

The ADSL is terminated in the ADSL router so the switch should serve its function as a L3 device hosting multiple Vlans on that office.




New Member

Re: Cisco 3560 & ADSL Line can work?

fyi, the router i m used is LinkSys broadband Router. ADSL modem is Aztech modem

i do have 2 unit of 3560 (both Fa0/1 as L2 route), fa0/2 has change to L3 and ip is

Results of show ip route is subnetted, 1 subnets

C is directly connected, Loopback0

R [120/1] via, 00:00:23, FastEthernet0/1 is subnetted, 1 subnets

C is directly connected, FastEthernet0/1 is variably subnetted, 6 subnets, 2 masks

C is directly connected, Vlan10

C is directly connected, Vlan100

C is directly connected, Vlan48

C is directly connected, Vlan64

C is directly connected, Vlan80

C is directly connected, Vlan96

C is directly connected, FastEthernet0/2

interface Loopback0

ip address 70.x.x.70


interface FastEthernet0/1

no switchport

ip address 141.x.x.9

ip rip authentication key-chain kal

no ip split-horizon


interface FastEthernet0/2

description ISP

no switchport

ip address


CreatePlease to create content