I am searching for a Cisco switch that provide layer 3 features for a local network. Currently i use a 3560 8 ports model and I need something with the same characteristics but having all ports as Gigabit ports.
Just go on cisco's main webpage and look up products. All the data is right there . Most switches are all gig now . There aren't many models that are still just 10/100 interfaces including the latest 3560 switches.
I found the 3560-x series, but they don't offer a model with only 8 ports. Another option is the 3560-C family with the
3560CG-8PC-S refference, but for this one i'm not sure if it offers the same features as the old 3560 version that i currently have. Can you confirm that this refference will offer me ip routing, vlan functionality, QoS, ...
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...