Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

cisco 3560G rebooring

i have 3560G switch with ios c3560-ipbase-mz.122-35.SE5.bin.

it is getting rebooting.find below output while rebooting automatically.

Initializing flashfs...

flashfs[1]: 508 files, 8 directories

flashfs[1]: 0 orphaned files, 0 orphaned directories

flashfs[1]: Total bytes: 32514048

flashfs[1]: Bytes used: 16192512

flashfs[1]: Bytes available: 16321536

flashfs[1]: flashfs fsck took 1 seconds.

flashfs[1]: Initialization complete....done Initializing flashfs.

front_end/ (directory)

extracting front_end/fe_type_1 (34696 bytes)

extracting front_end/front_end_ucode_info (43 bytes)

extracting ucode_info (76 bytes)

POST: CPU MIC register Tests : Begin

POST: CPU MIC register Tests : End, Status Passed

POST: PortASIC Memory Tests : BeginAddress Bus test failed at address 40400000 wrote 8040201 read FFFFFFFF

POST: PortASIC Memory Tests : End, Status Failed

POST: CPU MIC interface Loopback Tests : Begin

POST: CPU MIC interface Loopback Tests : End, Status Passed

POST: PortASIC RingLoopback Tests : Begin

POST: Failed Packet Receive asic 0 queue 0

POST: PortASIC RingLoopback Tests : End, Status Failed

POST: port-asic ring loopback test failed

driver class subsystem initialization failed

00:00:12: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.

00:00:12: %SYS-2-ASSERTION_FAILED: Assertion failed: "reg_used_xdr_portid_to_lc_logical_slot()"

-Process= "Init", ipl= 0, pid= 3

-Traceback= B4C12C 26287C 262AFC F3B274 F3B314 BBB978 BBBBA4 975510 96CAE4

%Software-forced reload

00:00:12 UTC Mon Mar 1 1993: Unexpected exception to CPUvector 2000, PC = 973754

-Traceback= 973754 97367C 26287C 262AFC F3B274 F3B314 BBB978 BBBBA4 975510 96CAE4

Writing crashinfo to flash:/crashinfo_ext/crashinfo_ext_29

=== Flushing messages (00:00:15 UTC Mon Mar 1 1993) ===

Buffered messages:

Queued messages:

00:00:64424509444: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.

00:00:12: %SYS-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure console debugging output.

Cisco IOS Software, C3560 Software (C3560-IPBASE-M), Version 12.2(35)SE5, RELEASE SOFTWARE (fc1)

Copyright (c) 1986-2007 by Cisco Systems, Inc.

Compiled Thu 19-Jul-07 18:15 by nachen

Debug Exception (Could be NULL pointer dereference) Exception (0x2000)!

SRR0 = 0x0062DEB8 SRR1 = 0x00029230 CPU Register Context:

Vector = 0x00002000 PC = 0x00973754 MSR = 0x00029230 CR = 0x22000024

LR = 0x0097367C CTR = 0x00000000 XER = 0x4000005B

Frame 04: SP = 0x01B78558 PC = 0x00F3B274

Frame 05: SP = 0x01B78570 PC = 0x00F3B314

Frame 06: SP = 0x01B78590 PC = 0x00BBB978

Frame 07: SP = 0x01B78688 PC = 0x00BBBBA4

Frame 08: SP = 0x01B78690 PC = 0x00975510

Frame 09: SP = 0x00000000 PC = 0x0096CAE4

Switch uptime is 18 seconds

cisco WS-C3560G-48PS (PowerPC405) processor (revision F0) with 122880K/8184K bytes of memory.

Processor board ID FOC1148Y1CP

Base ethernet MAC Address: 00:1e:bd:00:64:00

Xmodem file system is available.

The password-recovery mechanism is enabled.

Initializing Flash...

flashfs[0]: 510 files, 8 directories

flashfs[0]: 0 orphaned files, 0 orphaned directories

flashfs[0]: Total bytes: 32514048

flashfs[0]: Bytes used: 16449536

flashfs[0]: Bytes available: 16064512

flashfs[0]: flashfs fsck took 8 seconds.

...done Initializing Flash.

Boot Sector Filesystem (bs) installed, fsid: 3

done.

Loading "flash:c3560-ipbase-mz.122-35.SE5/c3560-ipbase-mz.122-35.SE5.bin"...@@@@@@

File "flash:c3560-ipbase-mz.122-35.SE5/c3560-ipbase-mz.122-35.SE5.bin" uncompressed and installed, entry point: 0x3000

executing...

Pls help me on this.

regards,

subash

4 REPLIES
New Member

Re: cisco 3560G rebooring

hi subash ur router flash is going to damage.change the router flash.

Re: cisco 3560G rebooring

Hi Subhash,

The output

""POST: PortASIC Memory Tests : BeginAddress Bus test failed at address 40400000 wrote 8040201 read FFFFFFFF

POST: PortASIC Memory Tests : End, Status Failed

POST: CPU MIC interface Loopback Tests : Begin

POST: CPU MIC interface Loopback Tests : End, Status Passed

POST: PortASIC RingLoopback Tests : Begin

POST: Failed Packet Receive asic 0 queue 0

POST: PortASIC RingLoopback Tests : End, Status Failed

POST: port-asic ring loopback test failed

driver class subsystem initialization failed

""

show that " PortASIC Memory Tests " "PortASIC RingLoopback Tests "

which is part of GOLD POST is failed.

This is hardware issue & you need to change the hardware, get it RMA/replaced done.

HTH..rate if helpful..

Purple

Re: cisco 3560G rebooring

Its failing a "POST" test you will to get it RMA'd by cisco.

""POST: PortASIC Memory Tests : BeginAddress Bus test failed at address 40400000 wrote 8040201 read FFFFFFFF

New Member

Re: cisco 3560G rebooring

hi subash ur router flash is going to damage.change the router flash.

680
Views
0
Helpful
4
Replies