Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

cisco-3620 reloads unexpectedly

Hi Cisco

We have 2 routers that keeps reloading at the same time with similar error. We haven't had any change on both routers. I tried to find what

Both of them get similar error:

System returned to ROM by bus error at PC 0x612CC298

SDZC010100 uptime is 48 minutes

System returned to ROM by bus error at PC 0x612CC298, address 0x472C7FB4 at 21:19:42 edt Mon Aug 20 2007

System restarted at 21:21:50 edt Mon Aug 20 2007

System image file is "flash:c3620-ik9s-mz.122-7c.bin"

cisco 3620 (R4700) processor (revision 0x81) with 61440K/4096K bytes of memory.

Processor board ID 24808943

R4700 CPU at 80Mhz, Implementation 33, Rev 1.0

Bridging software.

X.25 software, Version 3.0.0.

SuperLAT software (copyright 1990 by Meridian Technology Corp).

1 Ethernet/IEEE 802.3 interface(s)

1 Serial network interface(s)

1 Virtual Private Network (VPN) Module(s)

DRAM configuration is 32 bits wide with parity disabled.

29K bytes of non-volatile configuration memory.

32768K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

SDZC010100#

SDZC010200#show version

Cisco Internetwork Operating System Software

IOS (tm) 3600 Software (C3620-IK9S-M), Version 12.2(7c), RELEASE SOFTWARE (fc1)

Copyright (c) 1986-2002 by cisco Systems, Inc.

Compiled Sat 11-May-02 16:47 by pwade

Image text-base: 0x600089A8, data-base: 0x61314000

ROM: System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

SDZC010200 uptime is 58 minutes

System returned to ROM by bus error at PC 0x612CC298, address 0x4644DDD4 at 21:19:26 edt Mon Aug 20 2007

System restarted at 21:21:38 edt Mon Aug 20 2007

System image file is "slot0:c3620-ik9s-mz.122-7c.bin"

cisco 3620 (R4700) processor (revision 0x81) with 45056K/4096K bytes of memory.

Processor board ID 22865905

R4700 CPU at 80Mhz, Implementation 33, Rev 1.0

Bridging software.

X.25 software, Version 3.0.0.

SuperLAT software (copyright 1990 by Meridian Technology Corp).

1 Ethernet/IEEE 802.3 interface(s)

1 Serial network interface(s)

1 Virtual Private Network (VPN) Module(s)

DRAM configuration is 32 bits wide with parity disabled.

29K bytes of non-volatile configuration memory.

8192K bytes of processor board System flash (Read/Write)

16384K bytes of processor board PCMCIA Slot0 flash (Read/Write)

Configuration register is 0x2102

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: cisco-3620 reloads unexpectedly

Hello,

there is a bug in the IOS (i believe the IOS before 12.2.15, but not sure). Upgrading the IOS should solve this problem. I had the same problem with a 3660.

Kind regards

2 REPLIES

Re: cisco-3620 reloads unexpectedly

New Member

Re: cisco-3620 reloads unexpectedly

Hello,

there is a bug in the IOS (i believe the IOS before 12.2.15, but not sure). Upgrading the IOS should solve this problem. I had the same problem with a 3660.

Kind regards

121
Views
4
Helpful
2
Replies