Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco 3750 Stacking with different IOS Image

Dears,

 

I have two cisco 37450 layer3 switches.

The first switch details are:-

WS-C3750-48TS , SW version (12.2 (25) SEE1), and the SW image (C3750-IPSERVICESK9-M) the ports Fa 10/100

 

 

The second switch fetails are:-

WS-C3750X-24, SW version (12.2(55)SE5), and the SW image (C3750E-UNIVERSALK9-M) the ports Giga 10/100/1000

 

Please is it possible to stack these switches together or it must be the same HW specifications or must be the same SW version and image??

 

Appreciate your support,

 

Regards,

 

3 REPLIES

You can stack them together;

You can stack them together; however, it is recommended to use the same software version on the stack, so you should upgrade your regular 3750 to 12.2(55)SE5.

Keep in mind that if you have the LAN Base image/license on any of your switches you cannot stack them together unless every switch is running LAN Base.

I usually try to avoid mixing the original 3750 with the new generation 3750X switches in a stack, but it is definitely supported.

More details can be found at this link.

Super Bronze

duplicate

duplicate

Hall of Fame Super Gold

Duplicate posts.   Go here:

Duplicate posts.  

 

Go here:  http://supportforums.cisco.com/discussion/12176426/cisco-3750-stacking-different-ios-image

19
Views
0
Helpful
3
Replies
CreatePlease login to create content