cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1449
Views
0
Helpful
2
Replies

Cisco 3750 Switch (stacking) Etherchannel Trunking with Foundary Switch

Sunish Nair
Level 1
Level 1

Hi,

I would like to get some information about the Cisco 3750 Switch Etherchannel Trunking with Foundary Switch.

I got following documents about this configuration, if any body done this pls let help me to get configuratoin on the same.

http://subversity.net/etherchannel-trunking-between-a-foundry-switc

http://archives.devshed.com/forums/networking-100/foundry-trunks-to-cisco-etherchannel-1330210.html

http://archives.devshed.com/forums/networking-100/link-aggregation-etherchannel-between-cat-and-foundry-1221294.html

http://archives.devshed.com/forums/networking-100/foundry-trunks-to-cisco-etherchannel-1330210.html


These are the documents i found from the net about this configuration, if it's correct or if any body know how to do this integration please answer on my doubts.

Thanks in adavnce for answering my doubts....

Regards,

Sunish

2 Replies 2

Giuseppe Larosa
Hall of Fame
Hall of Fame

Hello Sunish,

LACP is standard based 802.3ad so it should be your best choice as described here:

http://subversity.net/link-aggregation-on-cisco-catalysts-and-found

if the C3750 is a stack you can form your bundle using ports taken from different switch members.

for trunking you need to use standard based 802.1Q

int gix/y

switchport

switchport trunk enc dot1q

switchport mode trunk

switchport trunk allowed vlan x,y,z

shut

you need to prepare all the ports before then you can add

verify with sh etherchannel summary and use a free not used group number

int gix/y

channel-group k mode active

then you can activate all the ports using interface range if you want to make a bundle that also acts as a trunk.

in interface range you can give no sh

follow the above link for configuration on the foundry side

Hope to help

Giuseppe

The information contained in or attached to this e-mail contains confidential or privileged information. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of the contents of this e-mail is PROHIBITED. If you have received this e-mail in error, please notify the sender and delete the e-mail immediately. Thank you.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: