Cisco 3750-X: difference between universal and ipbase image
There are two firmware files for Cisco 3750-X: Universal and the IPBase. We have a switch with Universal image and the lanbase license feature set. We do need now to have routing between the SVIs on that switch so IPBase license for the Universal is what we need.
Question (likely very silly but I will ask it anyway): Do we need to purchase the license if we would like to run an IPBase image (not the Jniversal with the IPBase license - but the IPBase image firmware version 12.2.58) or is it still a purchasable upgrade?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...