I have two cisco 3750G switch. one of them is working fine (good performance) with the old 10MB/half interface device. But another 3750G switch has bad performance with the same old 10MB/half interface device. Both switch are running same latest IOS and same configuration on the interface. Any idea?
You need to take a look at the device and see how the nic card is set if its auto/auto or hardcoded and then you have to match whatever the nic is set at . Is this a real old device , very few devices have to run at 10/half I would check to see if it will runn auto or can hardcode to 100/full .
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.