Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

cisco 3825 with NME-16ES-1G card

Hi,

I have got a cisco 3825 with a NME-16ES-1G module in it. I would like to set up a trunk link between the ISR router and the EtherSwitch Service Module. Is it possible?

Actually, I can not find the command switchport under the logical interface GigaEthernet 1/0 of the router ISR.

Best Regards,

Nicolas

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Bronze

Re: cisco 3825 with NME-16ES-1G card

Actually, I can not find the command switchport under the logical interface GigaEthernet 1/0 of the router ISR.

You need to create subinterfaces and assign a 802.1q Vlan ID to it.

http://www.cisco.com/en/US/docs/ios/lanswitch/command/reference/lsw_b1.html#wp1020413

HTH,

__

Edison.

2 REPLIES
Hall of Fame Super Bronze

Re: cisco 3825 with NME-16ES-1G card

Actually, I can not find the command switchport under the logical interface GigaEthernet 1/0 of the router ISR.

You need to create subinterfaces and assign a 802.1q Vlan ID to it.

http://www.cisco.com/en/US/docs/ios/lanswitch/command/reference/lsw_b1.html#wp1020413

HTH,

__

Edison.

Community Member

Re: cisco 3825 with NME-16ES-1G card

Hi

Thanks a lot, it works fine now with your solution.

Best regards,

Nicolas

330
Views
0
Helpful
2
Replies
CreatePlease to create content