Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco 3850 support BFD ?

Hi ,

  how can i enable and config BFD on the Cisco 3850 .

i had check eigrp plugin but It have not BFD Platform Support .

Core_IDC3850#sh eigrp plugins

EIGRP feature plugins:::

    eigrp-release      :   7.00.00 : Portable EIGRP Release                 

                       :   1.00.13 : Source Component Release(rel7)

    parser             :   2.02.00 : EIGRP Parser Support                   

    igrp2              :   3.00.00 : Reliable Transport/Dual Database       

    external-client    :   1.02.00 : Service Distribution Client Support    

    eigrp-nsf          :   2.00.00 : Platform Support                       

    Spatial Reuse Prot :   1.01.00 : Platform Support                       

    mtr                :   1.00.01 : Multi-Topology Routing(MTR)            

    EVN/vNets          :   1.00.00 : Easy Virtual Network (EVN/vNets)       

    ipv4-af            :   2.01.01 : Routing Protocol Support               

    ipv4-sf            :   1.02.00 : Service Distribution Support           

    ipv6-af            :   2.01.01 : Routing Protocol Support               

    ipv6-sf            :   2.01.00 : Service Distribution Support           

    vNets-parse        :   1.00.00 : EIGRP vNets Parse Support              

    snmp-agent         :   1.01.01 : SNMP/SNMPv2 Agent Support              

Core_IDC3850#

My 3850 OS ver 

Switch Ports Model              SW Version        SW Image              Mode  

------ ----- -----              ----------        ----------            ----  

*    1 32    WS-C3850-24T       03.03.01SE        cat3k_caa-universalk9 INSTALL

Br

Horace

1 ACCEPTED SOLUTION

Accepted Solutions
VIP Purple

Re: Cisco 3850 support BFD ?

As per the Cisco Feature Navigator output, this switch model does not support  BFD.

Herewith attached the supported feature of this switch model 3.3.1 software version.

HTH

Rasika

**** Pls rate all useful responses ****

3 REPLIES
VIP Purple

Re: Cisco 3850 support BFD ?

As per the Cisco Feature Navigator output, this switch model does not support  BFD.

Herewith attached the supported feature of this switch model 3.3.1 software version.

HTH

Rasika

**** Pls rate all useful responses ****

New Member

Re: Cisco 3850 support BFD ?

Hi Rasika

  Thanks.

Regards,

Horace

VIP Purple

Re: Cisco 3850 support BFD ?

Hi Horace,

If that answer your query pls mark this thread as answered.

Regards

Rasika

2367
Views
0
Helpful
3
Replies