Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cisco 4500X port/module naming convention

Hi all,

Just a quick question as I can't seem to find this information and don't have access to a 4500X.

When you have two 4500X and you connect them using VSS how are the ports referenced for a 16/32 port switch?

Is it

switch/module/port

i.e. 1/0/1 (for switch 1, port 1) and 2/0/1 (for switch 2, port 1)?

Also, if I add the 8 port uplink module would port 33 or 17 be addressed as

i.e 1/1/1 or 1/0/33 (on the 24 port switch) i.e. is the uplink module seen as module 1 (0 is used for the fixed switch port module in the chassis).

Thanks,

Darren           

1 REPLY
Cisco Employee

Cisco 4500X port/module naming convention

353
Views
0
Helpful
1
Replies