System image file is "bootflash:cat4500-ipbase-mz.122-52.SG.bin"
cisco WS-C4503-E (MPC8245) processor (revision 10) with 262144K bytes of memory.
MPC8245 CPU at 266Mhz, Supervisor II+
Last reset from Watchdog
3 Virtual Ethernet interfaces
96 FastEthernet interfaces
2 Gigabit Ethernet interfaces
511K bytes of non-volatile configuration memory.
The flash dont have crash info, the logging dont have any information.
The only thing that is different from the first unexpectedly reload is the configuration of some interfaces and ISE configuration, example:
aaa authentication login default local aaa authentication enable default enable aaa authentication dot1x default group ISE aaa authorization network default group ISE aaa accounting dot1x default start-stop group ISE
! interface FastEthernet2/4
description 802.1x Enabled switchport mode access authentication host-mode multi-host authentication order mab dot1x authentication priority mab dot1x authentication port-control auto mab dot1x pae authenticator dot1x timeout tx-period 3 spanning-tree portfast spanning-tree bpduguard enable !
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...