Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

cisco 4510E with two supervisor 8 problem

dear all

today we received new switch 4510r+E with two supervisors redundant .

my problem Is when I start the switch it is working fine for 10 mins after that it is stop forward data .

I try to force switchover to standby supervisor it is back to work for 10 minutes again after that stopped again .

any ideas

5 REPLIES
VIP Super Bronze

Hi,You may have a software or

Hi,

You may have a software or hardware issue.  I suggest you open TAC case with Cisco.

HTH

New Member

I ran into the same issue

I ran into the same issue this morning. For us its more like a few hours but forcing a switchover is the only way to bring things back up.

Anyone else run into this ?

New Member

This is the only thing we

This is the only thing we found. we are trying it out tonight

 

https://supportforums.cisco.com/discussion/12162221/catalyst-4506-e-sup-8e-arp-issues-any-vlan?referring_site=bss&channel=bdp

Hall of Fame Super Gold

Eject one of the supervisor

Eject one of the supervisor card and observe. 


What IOS version are you using?

New Member

Its actually been solved. The

Its actually been solved. The latest 3.3.1XO (released yesterday) fixes everything.

86
Views
0
Helpful
5
Replies