Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco 500 Series - Port Security

Hi,

Does anybody know how the port security works with Cisco 500 Series. I can not restrict one mac-address to one port manually so, how does it works?

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Cisco 500 Series - Port Security

Depending on the Smartport Role you assign the CE500 design has a port security. For instance the port role Access Point will only allow a maximum of 30 MAC addresses only and the Ip Phone + Desktop will allow only 3 MAC addresses.

http://www.ciscotaccc.com/kaidara-advisor/lanswitching/showcase?case=K43299660

So by configuring smartport, you are also configuring port security.

Regards,

~JG

Please rate helpful posts

3 REPLIES
New Member

Re: Cisco 500 Series - Port Security

What I mean is that I can not specify the maximum number of devices right? And just one device is allowed on the port

Re: Cisco 500 Series - Port Security

Depending on the Smartport Role you assign the CE500 design has a port security. For instance the port role Access Point will only allow a maximum of 30 MAC addresses only and the Ip Phone + Desktop will allow only 3 MAC addresses.

http://www.ciscotaccc.com/kaidara-advisor/lanswitching/showcase?case=K43299660

So by configuring smartport, you are also configuring port security.

Regards,

~JG

Please rate helpful posts

New Member

Re: Cisco 500 Series - Port Security

Thank you very much. That's the exactly information I was looking for.

112
Views
0
Helpful
3
Replies