Cisco 6500 --ACL entries showing incorrect order.

[nehakulsum]

Hi guys,

I need your suggestion on my following issue:

I have configure the ACL entries on my cisco 6500 series box but I see the ACL entries showing incorrect order when I check for the same.

Eg:

Europebox#show access-list 50

10 permit 192.50.20.2 (10 matches)
 15 permit 192.52.0.134 (98 matches)
 75 permit 198.29.232.23 (38 matches)
 80 permit 10.96.127.14
 90 permit 192.22.2.10
 40 permit 192.22.0.76

anyhelp would be appriciated

regards

neha

[InayathUlla Sharieff · Accepted solution]

Hi neha,

This is the expected behaviour that you see for the standard access-lists.
 

Regards

Inayath

[lonmc1977 · Accepted solution]

Do a config t, then

Ip access-list resequence 50 10 10

Then look again