Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Cisco 6500 and Adminstration Delagation

Hi There,

we are looking at deploying several Cisco 6513 and consolidating several infrastructures. With this we will have several administrators from other offices needing access to these devices to make changes to their specific environments. My question is, is there a way to delegate control to only specific areas, ports, etc. to specific administrators rather than the entire switch? We would rather them only impact their own environments instead of everyone. is this possible?

Thanks.

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: Cisco 6500 and Adminstration Delagation

You could use Privilege levels. You could even apply those privilege levels via radius or tacacs

privilege configure level 7 interface

privilege configure level 7 interface range -

privilege exec level 7 ping

privilege exec level 7 configure terminal

privilege exec level 7 configure

http://www.cisco.com/warp/public/480/PRIV.html

1 REPLY
New Member

Re: Cisco 6500 and Adminstration Delagation

You could use Privilege levels. You could even apply those privilege levels via radius or tacacs

privilege configure level 7 interface

privilege configure level 7 interface range -

privilege exec level 7 ping

privilege exec level 7 configure terminal

privilege exec level 7 configure

http://www.cisco.com/warp/public/480/PRIV.html

167
Views
0
Helpful
1
Replies
CreatePlease to create content