Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco 6500 - system log

Hi;

When i wrote on the system console "sh logging system" , i take

1: 10/19/10 12:55:20    5/-1: MAJ, GOLD, diag_get_fabric_status[2]: diag_hit_sys_limit: Test skipped!

  2: 10/19/10 12:55:20    5/-1: MAJ, GOLD, diag_get_fabric_status[1]: diag_hit_sys_limit: Test skipped!

  3: 10/19/10 12:55:20    5/-1: MAJ, GOLD, diag_get_fabric_status[9]: diag_hit_sys_limit: Test skipped!

this output many times. What does it mean ?

Thanks

Everyone's tags (2)
7 REPLIES
Cisco Employee

Re: Cisco 6500 - system log

Hello,

This message is reported by GOLD - General OnLine Diagnostic feature.

GOLD perodically gets fabric status of all fabric-enabled modules. When the CPU has something (important/higher priority) to do, it skips the test.

- Yogesh

New Member

Re: Cisco 6500 - system log

Hello;

First of all, thank you for your great support. I attached the "sh proc cpu" output. Is ıt normal usage ? In detail information i couldnt see anything.

Thanks.

Cisco Employee

Re: Cisco 6500 - system log

Hello,

sh processes cpu | exclude 0.00%  0.00%  0.00%

CPU utilization for five seconds: 39%/29% <<==

Total CPU usage is 39% - 10% due to processes and 29% due to interrupts.

I guess, some traffic may be getting software-cef switched.

Please review following documents and see if it helps.

Troubleshooting High CPU in Cisco Routers:

http://www.cisco.com/en/US/products/hw/routers/ps133/products_tech_note09186a00800a70f2.shtml

Troubleshooting High CPU due to interrupts:

http://www.cisco.com/en/US/products/hw/routers/ps359/products_tech_note09186a00801c2af0.shtml

- Yogesh

New Member

Re: Cisco 6500 - system log

Hi again;

As you say , i think i've problem about ip cef. On console i wrote "sh cef not-cef-switched" and took attached display.

What does "unsupported" mean ? Also this column continuously increase.

Thanks

Cisco Employee

Re: Cisco 6500 - system log

Hello,

"sh cef not-cef-switched" has not been very useful. Please do "sh ip cef switching statistics feature" few times, and you should be able to identify the feature that may be sending traffic for software-cef switching.

- Yogesh

New Member

Re: Cisco 6500 - system log

Thank you for your support.

I ' ll try.

Re: Cisco 6500 - system log

This is General OnLine Diagnostic alert message for fabric test

4100
Views
10
Helpful
7
Replies