Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cisco 6506 rebooted

Hi,

My Cisco 6506 switch got rebooted with the message as below:

%SPANTREE-5-EXTENDED_SYSID:

Configured from memory by console

System restarted...

Can any one suggest the root cause. Logs attached.

Thanks,

  • LAN Switching and Routing
1 ACCEPTED SOLUTION

Accepted Solutions
VIP Super Bronze

Cisco 6506 rebooted

In addition to Leo's good recommendation and to eliminated any fabric channel hardware issues, move the sup to slot 5 and see if the issue reappears

HTH

11 REPLIES
New Member

Cisco 6506 rebooted

Below is the info collected form Crash info:

Nov 27 17:44:21 IST: %FABRIC-SP-3-DISABLE_FAB: The fabric manager disabled active fabric in slot 6 due to the error (2) on this channel (FPOE 4) connected to slot 6

Nov 27 17:44:21.098 IST: SP: Supervisor has bad local fabric channel. StbyRdyForSwOver 0, StbyLocalFabLinkOk 0


%Software-forced reloa

Cisco 6506 rebooted

Hi,

Try re-seating the module 6.If it works then fine orelse open a TAC.

Thanks

New Member

Cisco 6506 rebooted

switch is working fine but want to analyse the actual reason for reload.

VIP Super Bronze

Cisco 6506 rebooted

what type of module is in slot 6?

New Member

Cisco 6506 rebooted

It is WS-SUP720-BASE

VIP Super Bronze

Cisco 6506 rebooted

so you have 2 sups with redundant sup in slot 6?

if yes, are they in redundant SSO mode?

New Member

Cisco 6506 rebooted

Only two modules are there WS-X6724-SFP in slot 2 and SUP720-Base slot 6

Hall of Fame Super Gold

Cisco 6506 rebooted

*Nov 27 16:41:36 IST: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for typt change the spanning tree topology

*Nov 27 16:41:37 IST: %SYS-5-CONFIG_I: Configured from memory by console

*Nov 27 16:41:41 IST: %SYS-5-RESTART: System restarted --

Cisco IOS Software, s72033_rp Software (s72033_rp-ADVENTERPRISEK9_WAN-M), Version 12.2(33)SXH1, RELEASE SOFTWARE (fc3)

Is that all?  You want answers as to why the chassis rebooted and this is the only information you can furnish?

New Member

Cisco 6506 rebooted

Sh tech support of the device is already attached.

1191
Views
0
Helpful
11
Replies
This widget could not be displayed.