Hi,
We have a Cisco WS-C6509 catalyst based switch with two WS-F6K-MSFC2 for L3 activity.This switch has been behaving wierdly.
One of the abnormality is the EIGRP SIA issue. Below are the details on the OS and the module details.
show module
Mod Slot Ports Module-Type Model Sub Status
--- ---- ----- ------------------------- ------------------- --- --------
1 1 2 1000BaseX Supervisor WS-X6K-SUP2-2GE yes ok
15 1 1 Multilayer Switch Feature WS-F6K-MSFC2 no ok
2 2 2 1000BaseX Supervisor WS-X6K-SUP2-2GE yes standby
16 2 1 Multilayer Switch Feature WS-F6K-MSFC2 no standby
show version from L3 MSFC.
show version
Cisco Internetwork Operating System Software
IOS (tm) MSFC2 Software (C6MSFC2-DSV-M), Version 12.1(11b)E12, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Mon 21-Jul-03 20:58 by cmong
Image text-base: 0x40008980, data-base: 0x4177C000
ROM: System Bootstrap, Version 12.1(4r)E, RELEASE SOFTWARE (fc1)
BOOTLDR: MSFC2 Software (C6MSFC2-BOOT-M), Version 12.1(11b)E12, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
Below is the error message.
001215: Mar 7 09:17:25.092 UTC: %DUAL-5-NBRCHANGE: IP-EIGRP 500: Neighbor 172.16.199.101 (Vlan22) is up: new adjacency
001216: Mar 8 09:18:18.360 UTC: %DUAL-3-SIA: Route 172.25.19.9/32 stuck-in-active state in IP-EIGRP 500. Cleaning up
001217: Mar 8 09:18:18.360 UTC: %DUAL-5-NBRCHANGE: IP-EIGRP 500: Neighbor 172.16.199.101 (Vlan22) is down: stuck in active
001218: Mar 8 09:18:22.088 UTC: %DUAL-5-NBRCHANGE: IP-EIGRP 500: Neighbor 172.16.199.101 (Vlan22) is up: new adjacency
Do we have a solution for this? What would a stable firmware upgrade for this switch?