Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Cisco 7600 problem ""bandwidth command is not supported in output direction for this interface""

i cant apply qos on cisco 7604 platform ,

i just want to gurantee cir for a specific subnet of ips .

i have a problem , when i apply the qos on an interface , i have the errro below :

<<bandwidth command is not supported in output direction for this interface >>

==================================================================================================

Gateway7600#sh version

Cisco IOS Software, c7600s3223_rp Software (c7600s3223_rp-ADVENTERPRISEK9-M), Version 15.2(4)S, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2012 by Cisco Systems, Inc.

Compiled Fri 20-Jul-12 18:18 by prod_rel_team

ROM: System Bootstrap, Version 12.2(17r)SX3, RELEASE SOFTWARE (fc1)

BOOTLDR: Cisco IOS Software, c7600s3223_rp Software (c7600s3223_rp-ADVENTERPRISEK9-M), Version 15.2(4)S, RELEASE SOFTWARE (fc1)

Gateway7600 uptime is 33 weeks, 3 days, 8 hours, 53 minutes

Uptime for this control processor is 12 weeks, 3 days, 8 hours, 57 minutes

System returned to ROM by power-on (SP by power-on)

System restarted at 06:26:11 UTC Sat Apr 20 2013

System image file is "sup-bootdisk:c7600s3223-adventerprisek9-mz.152-4.S.bin"

Last reload type: Normal Reload

Last reload reason: Reload Command

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

cisco CISCO7604 (R7000) processor (revision 2.0) with 458752K/65536K bytes of memory.

Processor board ID FOX1509G2DK

R7000 CPU at 300MHz, Implementation 39, Rev 3.3, 256KB L2, 1024KB L3 Cache

Last reset from power-on

1 Virtual Ethernet interface

9 Gigabit Ethernet interfaces

1915K bytes of non-volatile configuration memory.

65536K bytes of Flash internal SIMM (Sector size 512K).

Configuration register is 0x2102

========================================================================================================

here is an example :

Gateway7600(config)#interface gigabitEthernet 1/8

Gateway7600(config-if)#service-policy output test  

bandwidth command is not supported in output direction for this interface

Configuration failed on GigabitEthernet1/8

Gateway7600(config-if)#interface gigabitEthernet 1/8

Jul 16 15:24:49.697: %QOS-6-POLICY_INST_FAILED:

Service policy installation failed

Gateway7600(config-if)#service-policy input        

Gateway7600(config-if)#service-policy input test

bandwidth command is not supported in input direction for this interface

Configuration failed on GigabitEthernet1/8

Gateway7600(config-if)#

195
Views
0
Helpful
0
Replies
CreatePlease to create content