Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Cisco 7606 sup720 with MSCF: upgrade to 122-33.SRE6 fail

Hello,

I faced with problem while i was attemping to upgrade CISCO7606 (R7000) from 12.2(33)SRE1 to 12.2(33)SRE6.

rommon 2 > boot c7600s72033-advipservices-mz.122-33.SRE6.bin

Loading image, please wait ...

 

Invalid device specified

Booting from default device

 

Initializing ATA monitor library...

string is bootdisk:c7600s72033-advipservices-mz.122-33.SRE1.bin

 

monitor: command "boot" aborted due to user interrupt

rommon 3 >  [A [B

 

monitor: command " [A [B" not found

rommon 4 > boot bootdisk                        flash:c7600s72033-advipservices-mz.122-33.SRE6.bin

Loading image, please wait ...

 

Invalid device specified

Booting from default device

device does not contain a valid magic number

boot: cannot open "bootdisk:"

an alternate boot helper program is not specified

(monitor variable "BOOTLDR" is not set)

and unable to determine first file in bootflash

loadprog: error - on file open

boot: cannot load "flash:c7600s72033-advipservices-mz.122-33.SRE6.bin"

Another commands:

cmx## show bootvar

cmx## show bootvar               show bootvar              

BOOT variable = boot,1;

CONFIG_FILE variable =

BOOTLDR variable =

Configuration register is 0x2102

Standby not ready to show bootvar

cmx-beeline-2#show version | in image

System image file is "bootdisk:c7600s72033-advipservices-mz.122-33.SRE1.bin"

------------------ show sup-bootdisk: all ------------------

-#- --length-- -----date/time------ path

2 33554432 Nov 30 2010 08:58:08 +03:00 sea_log.dat

3 152889292 Nov 29 2010 17:41:54 +03:00 c7600s72033-advipservices-mz.122-33.SRE1.bin

4 154163148 Mar 26 2012 01:28:36 +03:00 c7600s72033-advipservices-mz.122-33.SRE6.bin

What could be reason of the issue?

Thanks.

1 ACCEPTED SOLUTION

Accepted Solutions
Purple

Re: Cisco 7606 sup720 with MSCF: upgrade to 122-33.SRE6 fail

      You have no specific boot statement so it will load the first file it finds in flash. Boot statement should read "boot system flash sup-bootdisk:c7600s72033-advipservices-mz.122-33.SRE6.bin   .  then write mem . 

3 REPLIES
Purple

Re: Cisco 7606 sup720 with MSCF: upgrade to 122-33.SRE6 fail

      You have no specific boot statement so it will load the first file it finds in flash. Boot statement should read "boot system flash sup-bootdisk:c7600s72033-advipservices-mz.122-33.SRE6.bin   .  then write mem . 

New Member

Cisco 7606 sup720 with MSCF: upgrade to 122-33.SRE6 fail

Perhaps you are right. I'try and let you know.

Before that I typed only: boot system sup-bootdisk:c7600s72033-advipservices-mz.122-33.SRE6.bin . then write mem .

Thanks.

New Member

Cisco 7606 sup720 with MSCF: upgrade to 122-33.SRE6 fail

Thank you. We've upgraded cisco now.

730
Views
0
Helpful
3
Replies
CreatePlease to create content