Cisco 7609-S with Brocade switch connect ICMP High CPU 90%
Between Cisco 7609 and Brocade switches are L2 configuration.Brocade switches in the Cisco 7609 to send ICMP if the 10,000 or so suddenly goes up 90% of the CPU of the equipment.ICMP 10000 CPU and again at the end of the normal level drops to 8-10%.Tested with other Cisco switches haebomyeon normal slip.And you know the minute you answer gyeongheop ask.Thank you.
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...