Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

cisco 877 and netflow

HI all,

i have configured netflow on the cisco 877 router on the vlan interface on port 2055.  the data reaches the server only every time the router is rebooted. its a remote router with VPN configuration and sends the data back to the head office. i have googled and tried many things. didnt work. pls help

pls s see the version

Cisco IOS Software, C870 Software (C870-ADVIPSERVICESK9-M), Version 12.4(6)T6, RELEASE SOFTWARE (fc2)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2006 by Cisco Systems, Inc.

Compiled Fri 08-Dec-06 22:44 by kellythw

ROM: System Bootstrap, Version 12.3(8r)YI3, RELEASE SOFTWARE

router uptime is 4 days, 19 hours, 40 minutes

System returned to ROM by reload

System image file is "flash:c870-advipservicesk9-mz.124-6.T6.bin"

Last reload reason: Reload Command

1 ACCEPTED SOLUTION

Accepted Solutions
Community Member

Re: cisco 877 and netflow

There is also a good blog on Network World regarding how to enable flexible netflow.http://www.networkworld.com/community/node/48191

9 REPLIES
Community Member

Re: cisco 877 and netflow

any ideas guys...please

Community Member

Re: cisco 877 and netflow

Hello,

Can you send us a few more details?  This is sort of vague to me "the data reaches the server only every time the router is rebooted."   How long does it send before it stops? How many interfaces are active?  What does the CPU utilization look like?

Community Member

Re: cisco 877 and netflow

hi jake,

thanks for the reply.i have found the problem. the remote cisco router 877 is not sending the data over the vpn tunnel. when the router reboots it makes the vpn connection and during that time the data comes through after that it stops. i had the laptop on the remote vlan and the data was flowing normally.so i guess its the vpn config that causing the issue here. are you able to help with the config,if i post the config here

Cisco Employee

Re: cisco 877 and netflow

Hi, Thomas.

Have you configured flexible netflow on 877?

Normal Netflow will not get encrypted over IPSEC tunnel.

Here is IOS Flexible NetFlow guide.

http://www.cisco.com/en/US/docs/ios/fnetflow/configuration/guide/fnetflow_overview_ps6441_TSD_Products_Configuration_Guide_Chapter.html
KK

Community Member

Re: cisco 877 and netflow

hi KK,

thanks, i will try the flexible netflow.

what i tried was normal netflow

config-if)# interface vlan
config-if)# ip route-cache flow

ip flow-export destination x.x.x.x 2055

i will try the flexible one and let u know tomorrow

thanks

tom

Community Member

Re: cisco 877 and netflow

Hi KK,

I removed all the original netflow commands and tried the flexible ones. no one of the commands are available or not recognised...

Tom

Community Member

Re: cisco 877 and netflow

There is also a good blog on Network World regarding how to enable flexible netflow.http://www.networkworld.com/community/node/48191

Community Member

Re: cisco 877 and netflow

thanks jake..still for some reason certain commands are unavailable on mine. as you see the first post,i am u

sing the latest IOS

Community Member

Re: cisco 877 and netflow

Guys,

i have the latest IOS on the cisco 877 . still commands like flow monitor,flow records are not available. any suggestions please?

3048
Views
0
Helpful
9
Replies
CreatePlease to create content