Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

cisco 877 router with one Static IP for NAT and PAT

Hi

Does cisco 877 support single Static Valid IP for NAT and PAT or Do I need an addition Valid IP for PAT ?

I configure the NAT (Dynamic) for my Internal LAN to access the internet, it works fine but I can't get the PAT for port 25 to reach my internal Mail server. I only have one Valid IP address.

Please advice here

Thanks

3 REPLIES
New Member

Re: cisco 877 router with one Static IP for NAT and PAT

Hi

i think that it should work. Try this :

R1Rack1#sh run | i nat ins

ip nat inside source static tcp 192.168.1.1 25 194.194.194.194 25 extendable

R1Rack1#

R1Rack1#

R1Rack1#sh ip nat trans

Pro Inside global Inside local Outside local Outside global

tcp 194.194.194.194:25 192.168.1.1:25 --- ---

R1Rack1#

Where 192.168.1.1 is your internal smtp server

and 194.194.194.194 is you public ip.

New Member

Re: cisco 877 router with one Static IP for NAT and PAT

Hi I have tried that already, But I still can't telnet to the public ip address of port 25.

Do you need me to post my config here ?

New Member

Re: cisco 877 router with one Static IP for NAT and PAT

Hi,

Just wondering if you have solved the problem,

AS I have pretty much the same issue

Cheers,

peter

256
Views
0
Helpful
3
Replies