Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

Cisco 877 show dsl interface atm

hi experts,

i've got a Cisco 877 router connected to an ADSL link. i'm using the show dsl interface atm just to have a look on its performance. i've tried to search on Cisco website on how to interpret the output but a blog gave me more info (http://itknowledgeexchange.techtarget.com/cisco/tag/dsl/). my question now is, what readings do i consider? is it on the left (ATU-R) or on the right (ATU-C)? thanks!

877ROUTER#sh dsl int atm0
                ATU-R (DS)                      ATU-C (US)
Modem Status:    Showtime (DMTDSL_SHOWTIME)
DSL Mode:        ITU G.992.1 (G.DMT)
ITU STD NUM:     0x01                            0x01
Vendor ID:       'ALCB'                          'ALCB'
Vendor Specific: 0x0000                          0x0000
Vendor Country:  0x00                            0x0F
Capacity Used:   31%                             85%
Noise Margin:    34.0 dB                         10.0 dB
Output Power:    16.0 dBm                        12.0 dBm
Attenuation:     10.0 dB                          6.0 dB
Defect Status:   None                            None                       
Last Fail Code:  None
Selftest Result: 0x00
Subfunction:     0x15
Interrupts:      1453 (2 spurious)
Activations:     3
Init FW:         embedded
Operartion FW:   embedded
SW Version:      3.919
FW Version:      0x1A04

                 Interleave             Fast    Interleave              Fast
Speed (kbps):             0             3040             0               768
Reed-Solomon EC:          0                0             0                 0
CRC Errors:               0                0             0                 0
Header Errors:            0                0             0                 0
Bit Errors:               0                0
BER Valid sec:            0                0
BER Invalid sec:          0                0

LOM Monitoring : Disabled

DMT Bits Per Bin
00: 0 0 0 0 0 0 0 6 6 7 9 9 A B B C
10: B B B B B A A A A 9 8 8 8 7 0 0
20: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2 2
30: 2 2 3 3 4 4 4 4 4 4 4 5 5 5 5 5
40: 5 5 5 5 5 5 5 5 5 5 5 5 6 5 5 6
50: 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6
60: 2 6 6 6 6 6 6 6 6 6 6 6 6 5 5 5
70: 5 6 6 5 5 6 5 5 5 5 5 5 5 5 5 5
80: 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
90: 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
A0: 5 5 5 5 5 5 5 5 5 4 5 4 4 4 4 4
B0: 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
C0: 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
D0: 4 4 4 4 4 4 4 4 4 3 3 3 3 3 2 2
E0: 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
F0: 2 2 0 0 0 0 0 0 0 0 0 0 0 0 0 0

Training log buffer capability is not enabled yet.

3 REPLIES
Community Member

Cisco 877 show dsl interface atm

ATU-R refers to the router side and ATU-C refers to ISP DSLAM side

Community Member

Re: Cisco 877 show dsl interface atm

ATU-R is your downstream and ATU-C is your upstream.

Sent from Cisco Technical Support iPhone App

Re: Cisco 877 show dsl interface atm

Hi,

Thanks for your inputs! I've found the answer to my question not so long ago

Sent from Cisco Technical Support iPhone App

3196
Views
0
Helpful
3
Replies
CreatePlease to create content